Corrugated Polycarbonate Accessories

Yes. Clear and bronze Suntuf sheets share the same profile within each range, so the accessories fit both. The Suntuf Beehive wall flashing suits Beehive clear and bronze, and the Suntuf IRN ridge cap and wall flashing suit IRN clear. Foam eaves fillers and screws are the same for every tint. Match the profile, not the colour.

It covers the gap at the apex where the sheets from each slope meet. The ridge cap sits over the sheet ends and sheds rain down either side, with eaves fillers beneath to close the corrugations. We stock the Suntuf IRN ridge cap.

Yes. Suntuf Beehive and Suntuf IRN are separate profiles with different sheet widths, 1045mm and 900mm, and each has its own wall flashing. A flashing or filler shaped for one will leave gaps on the other. The manufacturer says its accessories are made for its own profiles and may not fit other makers' sheets. Check the product name on your sheet before ordering.

It seals the line where the roof meets a wall, which would otherwise let water behind the sheet. The flashing sits over the sheet ends or edge, turns up the wall and seals against it with a polycarbonate-compatible sealant. We stock a Suntuf Beehive wall flashing and a Suntuf IRN wall flashing, so choose the one for your profile.

We stock one Suntuf foam eaves filler, in packs of 10. It sits under the sheet at the eaves and under the ridge cap, filling each corrugation so draughts, rain and pests stay out. Fit at least two per sheet, one on the top purlin and one on the bottom. Beehive's profile differs from IRN, so check the filler matches your sheet before ordering.