Key Benefits

• Designed for 3″ PALRUF™: Shaped to suit our 3″ PALRUF™ corrugated PVC roofing sheets.
• Closes Open Corrugations: Helps seal the gaps created by the corrugated profile at the roof edges.
• Helps Keep Out Draughts, Dust and Insects: Provides a simple barrier against unwanted air movement and debris entering through the corrugations.
• Neater Roof Finish: Closes the open ends of the profile for a cleaner-looking installation.
• Easy to Fit: Simple to position during installation before the roofing is secured.
• 660mm Length: Provides coverage across a substantial section of the sheet profile.
• Suitable for New Roofs and Repairs: Useful when installing a new PALRUF™ roof or replacing existing eaves fillers.
• Pack of 10: Convenient pack for smaller roofing projects or repairs.

Installation Information

• Minimum quantity: We recommend using at least two eaves fillers per sheet – one at the lower eaves and one at the upper support.
• Additional sealing: For a more complete seal, eaves fillers can be fitted at additional purlins where required.
• Positioning: Place the foam filler so it follows the corrugations of the PALRUF™ sheet and closes the open profile.
• Clean and dry surfaces: Make sure the area is clean and dry before fitting the fillers.
• Fit before securing the sheet: Position the eaves filler against the support before fixing the roofing sheet in place.
• Do not force the sheet: The PALRUF™ sheets should sit naturally over the fillers and supports. Do not pull, stretch or force the sheets into position if the profiles do not line up correctly.
• Use with the correct fixings: Eaves fillers are designed to close the corrugations and should be used alongside the appropriate roofing fixings and flashing where required.
• Check the finished seal: Make sure the filler is sitting evenly within the corrugations with no large gaps.